Ashby-P Insert
12
Surround Instructions
1.
Lay
the
top
surround,
right
surround and left surround panels
face down on non-abrasive surface
and bolt the panels together with the
hardware provided in the surround
kit.
2.
The power cord exits through the
right hand surround panel. Be sure to
bolt the panel with the cord relief on
the right hand side.
3.
Lay out the 3 piece trim kit and use
the L-Corner Brackets to attach the
Trim kit together.
4.
Take the Trim kit and slide it down
over the edges of the surround.
5.
Slide the assembled surround around
the insert and in front of the fireplace
opening. Slowly slide the insert back
and insert the side panels into the
slot on each side of the surround as
shown in Figure 7.
Figure 7
