23
Collection
Connecting Device
Connection of the profile system is through the serial or usb port located of the Toughbook computer
supplied. Once connected with the Profiler V3 program, open and the power switch of the profiler on.
T
he Program should display ‘Profiling System H
a
rdware Connected.’
Power On
The Profiler is powered on when the battery meter light is on. If the meter light is off, check the switch
for the power or charge the battery. Always turn on the device before opening the SSI Profiler
program.
Opening Profiler V3
To open the Profiler V3 program select the SSI Profiler icon on the desktop or select the same icon by
navigating to the folder: C:\Program Files\SSI Profiler 3\SSI.Surface.Roads.Profiler.App
Hardware Found
When the profiler is turned on, properly connected to the operator computer, and Profiler V3 is
running
, the software should indicate “
hardware found
”
. If hardware is not found and these
requirements are fulfilled, check the connections and profiler system power. If the profiler was
powered on after the program was opened, close the program and reopen it with the profiler
powered on. If problem persists, contact SSI Customer Support for assistance.
Navigate to Collection Window
Once hardware is found, the
‘
Collect
’ icon on
the shortcut bar or View>Collect will be available. To
enter this section, just left click on Collect.
Troubleshooting
If the system displays an error asking to reconnect the hardware, shut down the Profiler program and
reopen SSI Profiler, keeping the power to the profiler on. If this does not solve the problem, power
down the walking profiler and close the SSI Profiler program. After 10 seconds, turn on the walking
profiler and reopen SSI Profiler.