Software settings
Setting the transmit signal
A lot of alternatives for the signal processing algorithms (compressor, EQ, AGC)
implemented in ZeusRadio can be found in a wide variety of VST plug-ins. Also, there
are other features: De-Esser, Reverb, phase shifters, multiband compressors and so
on. VST plug-ins can be a good alternative to racks of expensive equipment to build
ESSB signal.
VST plug-ins are not a part of ZeusRadio and can be downloaded from the
internet from various websites devoted to the subject, or from websites of software
developers for sound processing.
In ZeusRadio v.2.8.1 plug-ins are only supported with built-in graphical user
interface. Plugins without graphical interface can not be configured in ZeusRadio
v.2.8.1.
The window for construction of the processing path
based on VST plug-ins is opened by clicking the View button
in the VST Plugins group in the TX Signal Settings Window.
After the ZeusRadio installation, the VST list does not contain any plugin. To add a
plug-in into the processing circuitry it is necessary to press Select VST Plugin and
select the plug-in file in, opened in Windows Explorer. After that, the plug-in will
appear as a line in the list. Up to 96 plug-ins can be added, they will be available on
8 pages. The signal will pass through them downwards.
There is a set of control buttons for each plug-in:
1 – up/down arrows to move the plug-in in the
processing chain (for a reordering of the plug-ins);
2 – plug-in settings window opening;
3 – on/off switch for the plug-in; if the button is not
pressed (does not glow green), the signal passes this
plug-in;
4 – sets the monitor signal output from this plug-in;
5 – button to delete the plug-in from the processing
chain.
SSB-Electronic GmbH © Page 68 of 88 V2.8.1 C
ontent is protected by Copyright.
1
5
3
2
4
