Software description
Settings window (Audio tab)
5 Sampling Frequency list
Dropdown list for selecting the audio sampling frequency.
6 Buffer Duration
Input field for the audio data buffer length. As higher the value is set, the bigger
the time difference between HF and audio signals will be. The minimum value
depends on the characteristics of the used audio device (sound card), but cannot be
less than 0.08 sec.
7 Pseudo Stereo button
On/off switch for pseudo stereo mode.
Note: This function is most useful when using a headphones. When using loudspeakers, the spatial
effect may be less noticeable.
8 Time Shift slider
Adjustment of the audio signal delay. Delay is 0,2 ms when the slider is in the left
position and 10 ms in the right position.
9 Channel Mixer slider
Adjustment of the signal distribution between the stereo channels. In the
leftmost slider position the signal of the left channel is reproduced without any
delay, while the signal of the right channel is heard with the delay that was set with
the Time Shift slider. In the rightmost slider position the relation is reversed: the
signal of the right channel is reproduced without any delay, while the signal of the
left channel is heard with delay.
Note: In fact the Time Shift slider sets the depth of the stereo effect, and the Channel Mixer slider
regulates the location of the apparent source of the spatial sound.
SSB-Electronic GmbH © Page 38 of 88 V2.8.1 C
ontent is protected by Copyright.
