Software description
Main window
50 Single, Average, Maximum buttons
These buttons set the display mode of the spectrum:
Single — quick signal display, suited also for short time signals.
Average — display of averaged values; the illustration is smoother.
Maximum — display of maximum values.
51 Buffer field
This field sets the buffer size for spectrum processing.
If „Average“ or „Maximum“ is chosen for the spectrum display, averaging (or the
definition of the maximum) process is done using the spectrum quantity set in this
field.
52 Auto Scale button
On/off switch for the auto scaling function of the vertical spectrum axis.
For auto scaling, the average power of the displayed spectrum range is used,
while the value is defined in a way that relatively weak stations can be seen while
strong stations are present.
53 Log button
On/off switch for the logarithmic display of the spectrum.
54 P3D button
On/off switch for the pseudo 3D display of the spectrum.
55 Scroll field
Input field for tuning steps of the VFO via the scroll wheel of the mouse.
Predefined tuning steps are available, additionally tuning steps can be set via the
keyboard.
56 Quick access bar for selecting a frequency
With the slider on this bar the transceiver can be tuned quickly with the mouse to
any frequency, from low frequencies on the left to high frequencies on the right side
of the bar.
57 Time Machine slider
SSB-Electronic GmbH © Page 28 of 88 V2.8.1 C
ontent is protected by Copyright.
