Software description
Main window
28 RIT, XIT buttons
RIT and XIT buttons turns on and off corresponding functions: "Receiver
Incremental Tuning" and "Transmitter Incremental Tuning".
RIT – receiver frequency deviation related to the primary VFO frequency; the
primary VFO frequency will be used for transmission.
XIT – transmitter frequency deviation related to the primary VFO frequency; the
primary VFO frequency will be used for reception.
29 Deviation frequency
Input field for the
frequency deviation (RIT/XIT) in Hz. The value can be adjusted
with the mouse wheel also.
30 SPT button
On/off switch for the SPLIT function. When active, reception occurs on the
frequency of the currently active (primary) VFO (with the chosen demodulator and
filter bandwidth), while for transmissions the frequency of the other (secondary)
VFO is used (with the demodulator and filter bandwidth chosen there).
31 SLK button
On/off switch for locking the frequency difference between the primary and the
secondary VFO – Split Lock. When SLK is switched on, frequency changes of the
active (primary) VFO are transferred synchronously to the secondary VFO. A
frequency change of the secondary VFO will have no effect to the frequency of the
active (primary) VFO.
32 A=B, A<>B buttons
The button A=B causes an equalization of the secondary VFO frequency and the
active (primary) VFO. The button A <> B causes a change of VFO frequencies: VFO A
becomes VFO B, and vice versa.
These buttons do not change VFOs modes (AM, SSB, CW).
SSB-Electronic GmbH © Page 23 of 88 V2.8.1 C
ontent is protected by Copyright.
31
32
29
28
30
