SSANGYONG NEW CHAIRMAN, Owner'S Manual

Page: 63 / 293

INTERIOR SWITCHES
4-6
RAIN SENSING WIPER
When the windshield wiper switch is at AUTO (1), the rain sen-
sor (3) automatically turns on and off the wiper. And it controls
the wiping speed by detecting the amount of rain drops.
AUTO Position
You can control the wiping speed manually by turning INT
switch (2).
F ( FAST ): Fast wiping speed
S ( SLOW ): Slow wiping speed
AUTO Position Recognition Function
z
When you start the engine with the wiper switch “ AUTO ”
position, the wiper will operate once to remind you that the
wiper switch is in “
AUTO ” position.
z
When you move the wiper switch to “ AUTO ” from “ OFF ”
position, the wiper will operate once.
z
Auto position recognition, especially in winter, may reduce the life
span of the wiper blade. Make sure the wiper switch is at
“OFF”
position unless it rains.
z
During winter time, the wiper blade can be frozen to windshield.
Wiper operation while blade is frozen can damage wiper motor.
Be sure to check the blade before operation.
z
The wiper operation on dry windshield can scratch glass and
wear the blade prematurely. Do not operate wiper when the wind-
shield is dry.
z
When you clean the windshield over the sensor with damp cloth,
the wiper may operate suddenly. It could cause serious injury. Make
sure to place the wiper switch and ignition switch to
“OFF”
po-
sition when not in use.
z
Make sure to place the wiper switch to
“OFF”
position before
washing the vehicle.
CAUTION
W165-04_Interior switches_en.p65 2006-10-02, ¿ÀÈÄ 5:56 Page 6 Adobe PageMaker 6.5K/Win