background image

Page 13

WARRANTY

LIMITATIONS

Ss Brewtech provides a one year limited warranty to the original purchaser that our product(s) will be 

free from manufacturing defects in material and workmanship. The limited warranty covers only those 

defects and/or product failures that arise as a result of normal use, and does not cover any problems 

that originate from:

- Improper cleaning, care and maintenance

- Modifications made to a product

- Operation outside the product’s published specifications

- Damage caused by incorrect assembly

- Exceeding recommended operational limits

Ss Brewtech reserves the right to request the original purchaser to return the defective item, at the 

purchaser’s  expense,  before  processing  the  warranty  claim  and  issuing  a  replacement.  If  a  direct 

replacement is no longer available, a product that serves the same purpose with equal or greater value 

shall be awarded. Ss Brewtech, at its discretion may also opt to simply refund the full purchase price in 

lieu of replacing the product.

The Ss Brewtech limited warranty is only applicable to customer-direct sales of home brewing equipment. 

Ss  Brewtech  makes  no  warranty  of  any  nature  beyond  what  is  contained  in  this  limited  warranty.  

Ss Brewtech is not responsible for representations made about a product by another retailer.

Summary of Contents for eController 1V















Reviews: