Page 8
BREW DAY OPERATIONS
(CONTINUED)
OFF
ON
OFF
ON
AUTO MODE
When the eKettle is in “AUTO” mode, the temperature controller is set up to modulate element output
based on a set temperature. This is used to maintain a specific temperature such as during a kettle
souring process or for use as a HLT. For example, if 172 is entered into the set value, the controller will
maintain the temperature of the liquid inside the kettle at 172 degrees Fahrenheit.
Once you have the temperature dialed in, you can now activate the heater by depressing the heater
activation button. The button will glow red to let you know the button has been depressed. Press
down on the button again to deactivate power. The element can also be shut down by adjusting the
temperature below its setpoint in “AUTO” Mode.
Always verify the element is fully submerged in water before activating the heater element.
Dry firing the element will cause irreversible damage to the element coil and void the
element’s warranty.
Auto Mode
