Page 2
OVERVIEW
eCONTROLLER 1V
eCONTROLLER 2V
The eController 1V is designed to be used with a brew-in-a-bag system (BIAB), but can also be useful
for someone who prefers modularity within their multi-vessel system. It can easily replace an existing
gas-fired HLT or boil kettle in an existing 3 vessel brewing system. The 1V controller is designed to
operate one element, and is compatible with our line of 10 and 20 gallon eKettles. A 30A dedicated
GFCI protected circuit is required.
(1) Thermoprobe
(2) Thermoprobes
The eController 2V is designed to be used as part of a 3 vessel, single infusion mash system. The
controller pairs perfectly with our line of insulated InfuSsion Mash Tuns, alongside a pair of temperature
controlled eKettles for the HLT (hot liquor tank) and boil kettle. The 2V controller can operate 2 elements
in total, albeit one at a time, and is compatible with our line of 10 and 20 gallon eKettles. Since only
one element can be operated at a time, the 2V controller retains the same 30A GFCI protected circuit
power requirement as the 1V.
