25
Piston Assembly Installation
Use a caliper to verify that the push rod lenth in the SwingLink is
26.3 mm. Turn the push rod counter-clockwise by hand to extend the
pushrod length. Turn the push rod clockwise by hand to decrease the
pushrod length.
NOTICE
The push rod length must be set to exactly 26.3 mm. Any other length
will reduce brake performance.
Use a 2 mm hex wrench to remove the SwingLink from the SRAM Lever
Internals Assembly Tool and place the pushrod into the coupler sleeve.
Align the holes of the SwingLink and the SwingLink bushings, then
press the pivot pin into the hole until it is flush with the lever body.
8
Digital Caliper
15 N•m (133 in-lb)
22 mm
9
2 mm hex wrench
22 mm
2 mm hex wrench
22 mm
10
