9
Caliper Brake Pad Removal
C a l i p e r B r a k e P a d R e m o v a l
Use a T25 TORX wrench to remove the brake caliper from the fork or
frame.
Remove the caliper mounting bracket and hardware from the caliper
then set them aside in the order that they were removed.
Use needle nose pliers to remove the E-clip from the pad retention
bolt.
Use a 2.5 mm hex wrench to remove the pad retention bolt from the
caliper.
Remove the brake pads and pad h-spring from the caliper.
NOTICE
Brake pads must be replaced if the total thickness of the backing plate
and pad friction material is less than 3 mm.
1
2
Needle nose pliers
20 mm or 15 mm Thru Axle
2.5 mm hex wrench
QR
3
Digital Caliper
2.7-3.2 N•m (24-28 in-lb)
22 mm
