manualshive.com logo in svg

SRAM Rockshox SID, Service Manual, Page: 53 / 69

Share
Download
SRAM Rockshox SID Service Manual Download Page 53

53

Damper Service

Clamp the cartridge tube into a vise with Charger vise blocks. Use the 

Clamp the cartridge tube into a vise with Charger vise blocks. Use the 

seal head wrench flats and remove the rebound damper assembly. 

seal head wrench flats and remove the rebound damper assembly. 

Remove the seal head from the rebound damper shaft.

Remove the seal head from the rebound damper shaft.
Discard the seal head.

Discard the seal head.

Spray RockShox Suspension Cleaner or isopropyl alcohol into the 

Spray RockShox Suspension Cleaner or isopropyl alcohol into the 

cartridge tube and clean the inside of the tube with a shop towel and a 

cartridge tube and clean the inside of the tube with a shop towel and a 

thin dowel (≤16 mm diameter).

thin dowel (≤16 mm diameter).
Inspect the inside of the cartridge tube for scratches.

Inspect the inside of the cartridge tube for scratches.

NOTICE

Scratches on the inside surface of the tube can cause oil to leak. If an 

internal scratch is visible, the cartridge tube may need to be replaced.

Vise with Charger Vise Blocks

19 mm

4 

5 

6 

Summary of Contents for Rockshox SID






































































Reviews:

No comments