manualshive.com logo in svg

SRAM Rockshox SID, Service Manual, Page: 40 / 69

Share
Download
SRAM Rockshox SID Service Manual Download Page 40

40

Charger 2 Damper Removal

Remove top cap o-ring. Install a new o-ring on the top cap.

Remove top cap o-ring. Install a new o-ring on the top cap.

Clamp the wrench flats of the Charger 2 Damper in a vise with the 

Clamp the wrench flats of the Charger 2 Damper in a vise with the 

rebound shaft oriented upward.  

rebound shaft oriented upward.  

Use the wrench flats and remove the rebound damper assembly. Wrap 

Use the wrench flats and remove the rebound damper assembly. Wrap 

a shop towel around the cartridge tube to absorb oil. 

a shop towel around the cartridge tube to absorb oil. 

Remove the cartridge tube from the vise and pour the oil into an  

Remove the cartridge tube from the vise and pour the oil into an  

oil pan.

oil pan.
Squeeze the bladder to drain the oil from the top cap assembly into an 

Squeeze the bladder to drain the oil from the top cap assembly into an 

oil pan.

oil pan.

4 

5 

SID

SID SL

SID 19 mm

SID SL 19 mm

6 

7 

Summary of Contents for Rockshox SID






































































Reviews:

No comments