16
Lower Leg Removal
Ultimate:
Ultimate:
Loosen the
Loosen the
spring side
spring side
bottom bolt 3 to 4 turns.
bottom bolt 3 to 4 turns.
Select/
Select/
: Loosen both bottom bolts 3 to 4 turns.
: Loosen both bottom bolts 3 to 4 turns.
Insert a 5 mm extension or hex wrench into the bolt head of the
Insert a 5 mm extension or hex wrench into the bolt head of the
spring
spring
side
side
lower leg. Strike the wrench to dislodge the shaft from the lower
lower leg. Strike the wrench to dislodge the shaft from the lower
leg. The bolt head should contact the bottom of the lower leg.
leg. The bolt head should contact the bottom of the lower leg.
Remove the
Remove the
spring side
spring side
bottom bolt. Clean the bolt and set it aside.
bottom bolt. Clean the bolt and set it aside.
Ultimate:
Ultimate:
Use a 10 mm socket and extension to remove the rebound
Use a 10 mm socket and extension to remove the rebound
nut on the
nut on the
damper side
damper side
lower leg.
lower leg.
Insert a 5 mm hex wrench into the rebound damper shaft. Strike the
Insert a 5 mm hex wrench into the rebound damper shaft. Strike the
wrench to dislodge the shaft from the lower leg.
wrench to dislodge the shaft from the lower leg.
Push the shaft into the lower leg.
Push the shaft into the lower leg.
Discard the crush washer and rebound nut.
Discard the crush washer and rebound nut.
5
Ultimate: 5 mm Spring Side Only
Select / : 5 mm Both Sides
6
Spring Side: 5 mm & Mallet
Spring Side
7
Ultimate: 10 mm Damper Side
Ultimate: 5 mm Damper Side
Ultimate: 5 mm Damper Side