4
p i c lt d .co m
u n it cali bration
As the operator of this unit you require accurate, safe, and reliable equipment to
perform coating inspections at the proper output voltage.
Prior to leaving our manufacturing facility Pipeline Inspection Co. certifies that
SPY
®
Model JM JeepMeter (voltmeter) has been calibrated and demonstrates
an accuracy of (+/- 5%). Since output voltage is regulated, this tolerance is
maintained regardless of load.
Your unit comes with a
Factory Calibration Certificate
and a
Factory
Authorized Calibration Decal
applied to the bottom of the unit both with the
date your unit was calibrated.
Our units do not tend to drift but it is recommended that this unit be calibrated at
least once per year or more frequently based on heavy usage.
Recalibration of
our equipment should be performed ONLY at a SPY
®
Authorized Service
Center due to the unique calibration process, test equipment utilized and
properly trained SPY
®
technicians.
We DO NOT recommend using any other calibration service other than a SPY
®
Authorized Service Center; using an outside service with technicians not trained
to work on SPY
®
brand equipment could damage the unit and if the enclosure is
opened will void the warranty.
When calibration is needed please return your unit to a SPY
®
Authorized Service
Center or SPY
®
manufacturing facility located at:
Pipeline Inspection Company
Attention: Calibration
1919 Antoine Drive
Houston, Texas 77055
Please include: Company Name and Contact Information. For a complete list of
Authorized Service Centers please visit our website at picltd.com. If a copy of the
Calibration Certificate on file is needed it may be obtained by emailing a request to
[email protected].
