p i c lt d .co m
9
CAUTION!
This meter is used to measure low energy high
voltage. The operator may be subject to electrical shock if the
meter is not properly grounded and / or operated in accordance with
instructions and procedures described within these operating
instructions.
controls
POWER
On
Off
INPUT
Pulse
DC
Kilovolts
Pipeline Inspection Co.
testi ng i nstructions
Test the strength of the batteries by placing the power switch to the “ON”
position. The display activating indicates the battery strength is good. If
the display flickers or does not come on then replace both batteries as
described on the battery instructions page. Place the power switch to the
“OFF” position after testing is complete.
