background image

p i c lt d .co m

15

Pipeline Inspection Company, hereafter referred to as (SPY

®

) warrants that 

SPY

®

 Model JM JeepMeter shall, under normal use and service, be free 

from defects in material and workmanship. SPY

®

‘s entire warranty obligation 

shall be limited to, at SPY

®

’s option, the repair or replacement free of charge 

to the buyer of any defective equipment or parts thereof which prove to be 
defective in material and workmanship under normal use and service.

Claims for defective parts must be made in writing within twelve (12) months 
after shipment of the equipment from the works of SPY

®

. Fast wearing and 

consumable parts including, but not limited to, electrodes and ground cables, 
are expressly excluded from the warranty. SPY

®

 shall have the option to 

require return of a claimed defective part to SPY

®

’s manufacturing facility in 

the U.S.A., freight prepaid by buyer for examination to establish buyer’s claim.

Except with SPY

®

’s prior written approval, SPY

®

 shall not be liable (a) for 

the cost of repairs, alterations or replacements or any expense connected 
therewith made or incurred by the buyer or its designers, or (b) for defects 
resulting from alterations or repairs made by others than SPY

®

‚ or its 

approved representatives.

SPY

®

 shall not be liable for damages, including but not limited to direct, special, 

indirect or consequential, resulting from the handling, or use, whether alone 

or in combination with other products, or any SPY

®

 equipment or third party 

designed or manufactured equipment, including without limitation, any loss 
or damage sustained or caused by the operation and use of the equipment 
which is improperly operated or its successful operation is impaired by 
natural elements after its delivery to the buyer.

The foregoing warranty is exclusive and in lieu of all other warranties 

whether written, oral or implied (including without limitation, any warranty 
of merchantability or fitness for purpose).

warranty

Summary of Contents for JeepMeter





















Reviews: