Sprint HTC Hero, Basic Manual, Page: 123 / 145

Im
por
tan
t Sa
fe
ty In
fo
rma
tion
3A. Important Safety Information 113
䢇
Heed service markings
. Except as explained elsewhere
in the Operating or Service documentation, do not
service any product yourself. Service needed on
components inside the device should be done by an
authorized service technician or provider.
䢇
Damage requiring service . Unplug the product from the
electrical outlet and refer servicing to an authorized
service technician or provider under the following
conditions:
䡲
Liquid has been spilled or an object has fallen
into the product.
䡲
The product has been exposed to rain or water.
䡲
The product has been dropped or damaged.
䡲
There are noticeable signs of overheating.
䡲
The product does not operate normally when you
follow the operating instructions.
䢇
Avoid hot areas
. The product should be placed away
from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
䢇
Avoid wet areas
. Never use the product in a wet
location.
䢇
Avoid using your device after a dramatic change in
temperature
. When you move your device between
environments with very different temperature or
humidity ranges, condensation may form on or within
the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before
using the device.
䢇
Avoid pushing objects into product
. Never push objects of
any kind into cabinet slots or other openings in the
product. Slots and openings are provided for
ventilation. These openings must not be blocked or
covered.
䢇
Mounting accessories . Do not use the product on an
unstable table, cart, stand, tripod, or bracket. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
NOTICE When taking the device from low-temperature
conditions into a warmer environment or from
high-temperature conditions into a cooler
environment, allow the device to acclimate to
room temperature before turning on power.