MATRIX
®
430VF
JOB D
AT
A
CONFIGUR
ATION
INTR
ODUC
TION
CONSOLE
15
98-05351-EN R1
GUID
ANCE
APPLICATION MAPPING & APPLIED ALERT
Application mapping is used to map coverage areas and
sound alerts when entering previously mapped applied
areas to alert the operator to turn on or shut off application.
NOTE: Application mapping does not control actual application.
Mapping with Console Only
To switch mapping and alerts off or on using the console:
1.
Press vehicle
in the centre of the screen.
W
Mapping and alerts on – status bar icon will change to
green
W
Mapping and alerts off – status bar icon will change to
red
Mapping with Work On/Off Switch
When installed, the work on/off switch should remain in the “off”
position for all setup options.
To switch mapping and alerts off or on using the switch:
1.
Turn the switch to the “On” or “Off” position.
W
Mapping and alerts on – status bar icon will change to
green
W
Mapping and alerts off – status bar icon will change to
red
To switch mapping and alerts off or on using the console while a
switch is attached:
1.
Turn the switch to the “Off” position.
2.
Press vehicle
in the centre of the screen.
W
Mapping and alerts on – status bar icon will change to
green
W
Mapping and alerts off – status bar icon will change to
red
Applied Alert
When entering an applied area, an audio alert will sound.
W
Two beeps – entering an applied area
