MATRIX
®
430VF
GUID
ANCE
JOB D
AT
A
CONFIGUR
ATION
INTR
ODUC
TION
CONSOLE
2
www.teejet.com
QUICK START GUIDE
SETUP THE CONSOLE
1. On guidance screen, press NAVIGATION AND GUIDANCE OPTIONS tab
to
display options.
2. Press HOME button .
3. Press CONSOLE button
. Adjust settings as needed.
X
LCD Brightness
X
Colour Scheme
X
Units
X
GNSS Demo Mode
X
Screenshot
X
Time Zone
CONFIGURE THE MACHINE
4. From the Home screen , press CONFIGURATION button .
5.
Select and configure a Machine profile
.
X
Select Machine Profile Number
A
– use to select 1 of 5 machine profiles.
The profile that is “active” is displayed/active on the operation screen.
X
Set Machine Type
B
– used to select the type of machine to indicate
how the vehicle will be displayed in relation to the rows and canopy on the
Guidance screen.
–
Mounted and trailed Airblast
–
Tower nebuliser/Powder Machine
–
Self-propelled
–
Harvester
X
Set Number of Implement Sections
C
– used to select the number of
implement sections. Range is 1 to 12 sections.
X
Set Section Widths
D
– used to enter the width of each section. Each section
can be a different width.
X
Set In-Line Implement Offset Distance
E
– used to define the in-line distance
from the GNSS antenna (the zero point) to the implement.
–
Positive value will move the implement behind the GNSS antenna.
–
Negative value will move the implement in front of the GNSS antenna.
6.
Select and configure a Field profile
.
X
Select Field Profile Number
F
– use to select 1 or 5 field profiles. The profile
that is “active” is displayed/active on the operation screen.
X
Set Row Spacing
G
– used to enter the spacing between each row.
X
Set Canopy Width
H
– used to enter the width of the canopy.
X
Set Number of Rows
I
– used to select the number of rows to next guideline.
7.
Set GNSS configuration
.
NOTE: When using the Matrix 430 in Europe, always work with GPS and
GLONASS. Use SBAS (EGNOS) where applicable.
#1
#4
#2
C
B
A
D
E
F
G
H
I
#3
#5
#6
#7
