MATRIX
®
430VF
JOB D
AT
A
CONFIGUR
ATION
INTR
ODUC
TION
CONSOLE
7
98-05351-EN R1
GUID
ANCE
Transport Mode
Transport mode is recommended for use when traveling
between fields as this will improve accuracy in guidance
functions.
Enable Transport Mode
To enable transport mode:
1.
On vehicle view guidance screen, press the TRANSPORT
MODE button .
W
When enabled, all guidance functions are disabled.
Disable Transport Mode
To disable transport mode:
1.
On vehicle view guidance screen, press the GUIDANCE
button .
NOTE: There will be a slight delay while exiting transport mode.
Straight AB Guidelines
A guideline is established by connecting both a marked A
point and a B point. This guideline can be adjusted to the
vehicle’s current location using the A+ nudge feature. Only one
guideline is available per job.
Canopies are illustrated using the configurations set in the current
field profile in combination with an established AB guideline. If no
guideline is established, canopy indication will not be shown on
the vehicle view guidance screen.
Marking A and B Points
To establish an AB guideline:
1.
Drive to the desired location of Point A
.
2.
While the vehicle is in motion,
on vehicle view guidance
screen, press MARK A icon
.
NOTE: a Mark A button is also available on the
Navigation and guidance options
menu
3.
Drive to the desired location of Point B
.
4.
Press MARK B button
to establish the AB line.
The console will begin providing navigation information.
NOTE: The MARK B Icon is not available for selection
(greyed out) until the minimum distance is travelled
(10.0 feet / 3.0 metres).
Use CANCEL MARK button on the Navigation and guidance
options
menu to cancel the Mark A command and revert to the
previous guideline (when established).
