SPR Therapeutics, Inc. SPRINT PNS System, Clinician Instructions For Use, Page: 44 / 72

Chapter 5: Patient Counseling
44 | SPRINT ® PNS System – Clinician Instruction for Use [L0090-MAN-000 Rev F]
5
Patient Counseling
Review the Patient Instructions for Use, including the warnings and precautions listed in the Patient
Instructions for Use, with the patient. Also discuss the following topics with the patient to ensure
optimal use of the SPRINT
®
PNS System.
5.1) System Use at Home
In addition to reviewing the Patient Instructions for Use, advise the patient on the following topics prior
to at-home use:

System components and use

System set-up and appropriate placement of the Pulse Generator specific to the patient
o
Pulse Generator placement should not induce tension on the MicroLead Connector
cable or MicroLead.
o
Pulse Generator placement should not be positioned in such a manner that it unduly
induces motor activation.

Care and caution should be taken to assure that the lead does not become dislodged during
bandage changes.
 Physical activities that place undue stress on the MicroLead Connector or MicroLead should be
avoided.

The purpose and use of the MRI Safety Card provided on the back of the Patient Instructions for
Use.
5.2) MicroLead Exit Site Care and Bandaging Instructions
Instruct the patient on proper care of the MicroLead exit site(s) and protection of the MicroLead to
minimize potential for inadvertent or unintentional dislodgement.

The Waterproof Bandage should be changed when it becomes soiled or no longer adheres well
to the skin. This may also be a good time to replace the Mounting Cradle, especially if moving it
to a different position would be helpful in minimizing skin irritation.

Take care when removing the Waterproof Bandage and Mounting Cradle to prevent dislodging
the MicroLead.
 Take care when placing the new Waterproof Bandage to ensure that the non-adhesive center is
located over the MicroLead and Connector. The adhesive portion of the Waterproof Bandage
should not come in contact with the MicroLead itself.

Assure that all adhesive components are placed on clean, dry skin, free of lotions or cosmetic
products.

The Waterproof Bandage, Mounting Cradle, or Mounting Pad may be difficult to apply to oily
skin or skin to which lotion has been applied. The skin should be cleaned with mild soap and
water and allowed to dry. If adhesion is still a problem, wipe the skin with alcohol and allow it to
dry.