33
This document is written and published by ShockWatch, Inc. All rights reserved.
USER MANUAL
ENVIRONMENT
When temperature, humidity, and pressure sensors are to be used, the environment section allows users to set
low and high thresholds for these parameters. This section is where settings are made for both factory installed
temperature/humidity sensors or the external temperature/humidity/pressure sensor.
SLOT ALARMS
The Slot Alarms window allows the user to specify alarm settings depending on the factory options and peripherals
that have been specified in the Firmware Options tab.
GRMS (VIBRATION)
gRMS alarms allow ShockLog 298 users to set slot alarms for gRMS data. In the setup window, users must select
the gRMS option (Firmware Options) for this measurement to be available.
Users should enable the axes for which a gRMS alarm is required and set the level as a percentage of the shock range.
Summary of Contents for ShockLog 248
Page 1: ...USER MANUAL...