101
APPENDIX A - SHOCKLOG SATELLITE
This document is written and published by ShockWatch, Inc. All rights reserved.
DOWNLOADING THE SHOCKLOG
SATELLITE
When the ShockLog Satellite system’s journey has ended, the full dataset from the ShockLog can be downloaded
through the USB port. This step is recommended if impact data needs additional analysis.
RECOMMENDED STORAGE
When the unit is not in use, it is recommended that the ShockLog be stopped and the satellite module be turned off.
To turn off the satellite module, locate the satellite module in the ShockLog Satellite box and disconnect the
connector/cable.
Locate the plug and insert it into the connector such that the word OFF is visible. NOTE If the word ON is visible, you
will be powering the module and draining the battery
REDEPLOYING THE SHOCKLOG
SATELLITE
When the ShockLog Satellite is ready for another journey, the ShockLog should be reprogrammed for the new
journey. When a new setup is sent to the ShockLog, all existing data is deleted from the device. Refer to Creating a
Setup section for instructions on creating a new setup.
Summary of Contents for ShockLog 248
Page 1: ...USER MANUAL...
