FresneLED 250 TW
14
Menu:
OPTIONS (pictures 7 e 8)
■
IR CONTROL (not implemented)
■
SILENT MODE
■
MASTER MODE
■
SLAVE MODE
■
AUTO CONFIGURE
SILENT MODE (picture 7.1)
•
↑
and
↓
to select ENABLE or DISABLE
•
SELECT
to confirm
• the symbol
✓
appears if the function is active
•
BACK
to go back to the previous menu
•
EXIT
to go back to the main menu
MASTER MODE (picture 7.2):
This function can be activated only if the luminaire is
in the STAND ALONE mode.
In DMX mode “MASTER DISABLE BY DMX” will appear
and it is not possible to select the ENABLE function.
•
↑
and
↓
to select ENABLE or DISABLE
•
SELECT
to confirm
• the symbol
✓
appears if the function is active
•
BACK
to go back to the previous menu
•
EXIT
to go back to the main menu
On the display MASTER MODE appears under CCT.
SLAVE MODE (picture 7.3):
This function can be activated only if the luminaire is
in the STAND ALONE mode.
In DMX mode “SLAVE DISABLE BY DMX” will appear
and it is not possible to select the ENABLE function.
•
↑
and
↓
to select ENABLE or DISABLE
•
SELECT
to confirm
By selecting ENABLE the zoom control mode will be
required (*).
(*) Since the zoom function is not implemented it will
be possible to choose indifferently one of the two
modes
•
↑
and
↓
to select FREE ZOOM or ZOOM FROM
MASTER
•
SELECT
to confirm
• the symbol
✓
appears if the function is active
•
BACK
to go back to the previous menu
•
EXIT
to go back to the main menu
On the display SLAVE MODE or SLAVE MODE, FREE
ZOOM appears under CCT.
AUTO CONFIGURE (picture 8)
This function copies the set up from a luminaire to the
chain connected ones.
All the auto-configurating luminaries switch on and
remain lit until the DONE button is pressed on the
starting luminaire.
- AUTO CONFIGURE in DMX MODE (picture 8.1):
•
↑
and
↓
to select AUTO COPY, AUTO PATCH
( The ZOOM OFFSET function is not implemented)
•
ENTER
to confirm (or BACK or EXIT to go back to the
main menu without making any changes)
AUTO COPY, AUTO PATCH or ZOOM OFFSET Mode:
■
AUTO COPY:
same DMX addresses for all the
luminaires
■
AUTO PATCH:
progressive DMX addresses, following
the address of the previous luminaire
AUTO COPY
DMX ADDRESS
FresneLED
Dimmer
CCT
Strobe
Zoom (*)
1
1
2
3
4
2
1
2
3
4
3
1
2
3
4
4
1
2
3
4
It configures the FresneLED 2-3-4 like the
FresneLED 1
AUTO PATCH:
DMX ADDRESS
FresneLED
Dimmer
CCT
Strobe
Zoom (*)
1
1
2
3
4
2
5
6
7
8
3
9
10
11
12
4
13
14
15
16
It configures the FresneLED 2-3-4 like the
FresneLED 1 with a shifted DMX address
(*) Not implemented
