June 11, 2020
6
902-293 6’ IND. SECTIONAL SLIDE (VL)
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
In addition to the components on the packing list you will need a
drill with a ½” drill bit, tape measure, post hole digger, blocking
material, level, and a dry erase marker.
INSTALLATION STEPS
__1)
Review all instructions before beginning:
__2)
Unpack, organize, and identify all components:
Be sure to
place all painted components on a protective surface (cardboard,
cloth, etc…) to prevent damage.
__3)
Locate placement of the Independent Sectional Slide:
See
top down view of your instruction booklet.
__4)
Layout the Footing holes for the Independent Sectional
Slide:
Locate your footing drawing and mark your holes as shown.
Dig your footing holes to the proper depth.
__5)
Attach the Independent Sectional Slide Deck to the post:
Attach the Independent Sectional Slide Deck (8) to the post (4). See
Detail A. Align the deck to the posts. Attach with four 1-1/4” bolts
(16), eight 3/8” flat washers (10), and four 3/8” lock nuts (11).
Tighten.
Slide post into the designated hole. Make sure the slide
side of the deck and the stair side of the deck are facing the correct
directions.
Brace in position.
Detail A
