June 11, 2020
10
902-293 6’ IND. SECTIONAL SLIDE (VL)
INSTALLATION INSTRUCTIONS
INSTALLATION STEPS CONTINUED
__10)
Assemble the slide:
The two components of the slide need
to be assembled. An additional hardware kit is attached to the slide
entrance. Bolt the pieces of the slide together with the bolt heads on
the slide entrance side.
Hand tighten only.
Once the slide is in
place, the nuts will need to be removed to attach the support brace.
__11)
Attach the Slide to the Deck:
Hoist the slide to the deck and
attach using three 1-¾” bolts (15) and three flat washers (10).
Hand tighten only.
See Detail G.
__12)
Attach T Legs to the Slide:
Place the T legs (9) into the
designated holes. Attach the legs to the exit of the slide with four 1-
¼” bolts (16) and four 3/8” flat washers (10).
Tighten.
See Detail
H.
Detail H
Detail G
