9
3. INSTALLATION PROCEDURES OVERVIEW (CONTINUED)
Please follow instructions (a) through (d) to install the mount bracket.
(a) Using a 5/16” drill bit, drill holes in the wall where the Inverter will be installed. Note that position specifications
shown here are for reference only. (* Note: When mounted on the bracket, the Inverter display will be at a
height ~1 1/2” lower than the top mounting bracket screws. Mount at a height that will make the display easy
to read.)
(b) Insert one screw anchor (22) into each of the four holes. Secure screws (21) in the upper holes but leave at
least 8 mm of each screw exposed.
(c) Hang the mounting bracket (A3) onto the upper screws (21) as follows. First, hold the mounting bracket so
one screw is inserted through the enlarged part of the screw slot. Then slide the mounting bracket (A3) so the
other screw comes into place in its slot.
Installation Procedures Overview
Installation Procedures Overview
