15
DC Side Power Cord Instructions
1. To simplify installation, the power cord on the DC side has been pre-attached to the Inverter at the factory.
The DC power cord uses a special Powerpole® Connector by Anderson Power Products. Do not replace it with
any other type of connector.
2. The DC cords comply with UL (AWM 2586) specifications:AWG16, 105°C ( 221°F), 600V, three wire, with
colors red, black, and green with yellow. The red wire connects to po), the black connects to negative(-),
and the green with yellow connects to ground (G).
3. INSTALLATION PROCEDURES OVERVIEW (CONTINUED)
AC Connections
Installation Procedures Overview
Installation Procedures Overview
