16
3. INSTALLATION PROCEDURES OVERVIEW (CONTINUED)
Procedure 4: Install the Boost Converter Boxes
Please follow below steps to install a Boost Converter.
1. Remove screws (28) from the front frame (A2).
2. Insert wires from the Boost Converter (A12) into connectors in area A and B on the Cardio Unit in order
(1) (2). Note: In area A, place the open line (with no wire) on top. In area B, directly insert the plug into the
connector on the Cardio Unit.
3. Align the holes in the Boost Converter (A12) with the screw holes in the product frame (A2). Use the screws
(28) removed in step (a) to secure the Boost Converter to the Cardio Unit frame. (Note: Tighten the screws until
the metal plates contact each other securely.)
Installation Procedures Overview
