SportsArt Fitness C55R, Manual

Page: 32 / 57

31
To adjust the seat position via holes in the frame, follow the instructions below. The
frame has two sets of holes, one in front (a) and one more toward the back (b), for the
gas spring connection. Connecting the gas spring at the front hole makes the seat
closer and lower in relation to the display. Connecting the gas spring at the back hole
makes the seat further and higher from the display. Tall people would probably prefer
a set up with the gas spring connected at the back hole. This is the position set at the
factory.
Follow steps below to change the gas spring connection from one set of holes to the
other.
1. Use the gas spring to adjust the seat to the lowest position.
2. Place an 8-inch to 12-inch (20-cm to 30-cm) object under the back part of the frame
as shown