SPORTS ART 805p Owner'S Manual Download

Page: 24 / 25

2. If you turn on the POWER switch and the switch is lit, but there is no display,

please contact your dealer for more information.

ERROR 7 is a self diagnostic code to alert you to a problem with the electronic stride
adjustment mechanism.

1. If you turn on the unit and ERR 7 appears on the display.

2. When you are using the STRIDE

keys to adjust the stride length, the stride

adjustment does not work, and ERR7 appears on the display.

Please contact your dealer immediately, and DO NOT use the unit, as the stride
adjustment mechanism is damaged and must be repaired or replaced.

Caution: If ERR 7 appears and blinks for couple seconds then the display returns to

normal, OR you press the STRIDE

keys to adjust the stride length and

ERR 7 appears and blinks, please contact your dealer for further
information because the stride system is damaged and should not be used.

If there is no load or the load does not respond properly when you press the LEVEL
keys, please contact your dealer for further details.

If your display has no SPM reading during your workout, please contact your dealer
for more details.

Cautions: Do not attempt to repair or service the Sports Art 805P elliptical trainer,

unless you are a factory authorized service professional. Such an attempt
will automatically void the factory warranty.

(B) ERROR 7 MESSAGE: STRIDE ADJUSTMENT MALFUNCTION

(C). IF THE LOAD DOES NOT RESPOND PROPERLY:

(D). NO SPM READING:

▲▼

PDF created with pdfFactory trial version

www.pdffactory.com

Summary of Contents for 805p


























Search results

Summary of Contents for 805p

Reviews:

Related manuals for 805p

Brands by name

Popular brands

SPORTS ART 805p, Owner'S Manual

Search results

Summary of Contents for 805p

Reviews:

Related manuals for 805p

Brands by name

Popular brands