41
ENGLISH
INFORMATION ON ASSEMBLY
• Assembly of the product must be carried out carefully by an adult person. Ask for the
assistance of another person with technical insight in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present. Do
not dispose of the packaging materials until assembly is complete.
• Please note that there is always a risk of injury when using tools or completing
manual tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave any tools
lying around. Place the packaging materials somewhere where they will not pose any
hazards during assembly. Packaging foil or plastic bags pose a suffocation hazard for
children!
• After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to protect
your floor as there is no guarantee that, for instance, the rubber feet will not leave
marks behind.
• Make sure that the cable is crushed during assembly.
SP-TM-4216e-06 (DE+GB).indb 41
9/12/13 5:16 PM
