60
9. OPERATION
CAUTION
• Connect the power plug to a certified, grounded power outlet only.
• Before you start exercising, read through and follow all advices and instructions
mentioned in chapter "Training and operating instructions".
• We recommend to maintain a slow speed at the beginning of a session and hold on
to the handrails until you become comfortable and familiar with the treadmill.
• Attach the magnetic end of the safety key to the computer and also attach the clip of
the safety key to your clothing.
• To end your workout safely, press the
STOP
button or pull the safety key, then the
treadmill will stop immediately.
START-UP (MANUAL MODE)
1. Power on the treadmill using the power switch.
2. Attach the magnetic end of the safety key to the computer.
3. Press the
START
button. Now the system enters into a 3 second countdown. The
buzzer emits a sound. The speed window displays the countdown. After 3 seconds,
the treadmill will start to run at a speed of 1.0 km/h.
4. After start-up, use the button
SPEED+/-
to adjust the speed.
5. Use the button
/-
to adjust the incline.
6. Press the
STOP
button to stop the treadmill.
Note:
When holding the pulse handles with two hands for about 5 seconds, the display
will show the pulse data.
AUTOMATIC DISPLAY SHUTDOWN
• If the treadmill is in idle state and no buttons have been pressed for 10 minutes, the
display will go out in order to save power.
• You can press any button to wake up the display.
SAFETY KEY FUNCTION / EMERGENCY STOP
Important:
Always attach the magnetic end of the safety key to the computer before you
start with the training. Attach the other end of the safety key to your clothing.
• If you pull the safety key during training, the treadmill will stop immediately.
• All windows display “―――”.
• The buzzer will emit 3 sounds.
• Attach the magnetic end of the safety key to the computer to continue the training.
FUSE
• In case the fuse has been triggered, push the
RESET
button.
• Check if the belt is lubricated sufficiently.
• Check if the belt's tension is sufficient.
SP-TM-4216e-06 (DE+GB).indb 60
9/12/13 5:16 PM
