Sportplus SP-HT-2507-TS, Instruction Manual

Page: 4 / 46

SportPlus
Model: SP-HT-2507-TS
Language : UK
Page : (of 160 Pages)
Version : 3.0
Date : 007.08.09
immediately.
This equipment is to be used by only one person at any one time.
Use the product only on even and non-slipping surfaces. Do not use it near
water and always allow sufficient surrounding space to ensure safety.
This equipment has many moving parts; keep your fingers and other limbs
clear of these parts. Failure to do so could cause injury. Do not insert any
implements into openings in the equipment.
ATTenTIon – PRoDUCT DAMAGe
Please do not attempt to alter or modify the product in any way. Only
use original spare parts. Repairs should only be carried out by qualified
technicians – unauthorized repairs could put the user at risk. Use this
product only as described in this manual.
Protect the product from splashes, humidity, high temperature and direct
sunlight.
ADVICe FoR BATTeRY HAnDLInG
Batteries can be extremely dangerous if swallowed. Therefore, keep
batteries away from children. If a battery has been swallowed, seek medical
help immediately.
Remove batteries when they are out of charge or if the device should not
be used for a longer period of time, in order to avoid accidents due to
battery leaking.
Do not recharge, disassemble ou throw batteries into the fire. RISK OF
EXPLOSION.
Pay attention to the polarity marks (+) and (-). Always replace all batteries,
do not mix used batteries with new ones, or with batteries of a diffent type!
The use of alcaline batteries is preferrable, because they have a longer life
than zinc coal batteries.
It is necessary to replace the batteries when the display becomes weaker
or completely blank.
ADVICe FoR THe ASSeMBLY
The product should be carefully assembled by a responsible adult. If in any
doubt, please refer to a technically qualified person.
Before commencing with assembly, read the safety and assembly
instructions carefully.
Choose a clear, flat surface to begin your assembly. If possible, use an
underlay to protect the assembly space from dirt and scratches. Remove
all packaging materials and lay out all the parts. This will help you visualize
your finished product and simplify the procedure.
Using the ‘Parts List’ ensure that no parts are missing. Dispose of all the
packaging materials when the assembly is completed.
Assemble the product carefully. There is always a risk of injury when using
tools for technical work.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•