Date of issue:
February, 2019
Revision
1
Page
30/76
!Attention!
T
o avoid risk of electrical shock or contact
with moving parts during dismantling and
reassembly, make sure all switches are in
the off position and that the power lead is
disconnected from the mains.
-
U
nscrew the security knobs and remove the
front flange (fig. 4 and 5).
-
D
ismantle the tap from the flange by
removing the fixing pin (fig. 6) so that you can
remove the lever and its spring and release the
piston from its housing (fig. 7).
!Attention!
T
o prevent the formation of bacteria
always remove and clean the piston o-ring
seals.
F
ailure to comply with this
requirement poses a health hazard.
Fig. 4
Fig. 5
Fig. 6
Fig. 7