![background image](http://html.mh-extra.com/html/spm/big-juice/big-juice_instruction-manual_1349082024.webp)
Use and installation manual
Issue date:
28
th
Oct 2009
Revision:
IMQ
Page :
24/84
- The other threaded ring nut must be screwed
onto the water cock, which also has a thread
(Fig. 7).
- Open the water cock.
- Fit the plug into the socket following the
instructions given in the previous section titled
“connection to the power supply”.
- Power up by switching on the main switch (B)
(Fig. 4).
-
The
tank
will
now
start
filling
automatically until the maximum level is
reached (total capacity: 12 litres). An
electronic sensor keeps the tank water
level constant (every time a drink is
dispensed, the water level is automatically
topped up).
Minimum and maximum levels
As already outlined in the previous section, this
model features an electronic control system
which regulates the tank water level, performing
the following specific functions:
in the manual refilling mode: when the water in
the tank reaches the minimum level, an
electronic system automatically switches off the
dispensing function (no drinks are dispensed).
On a technical level, this represents an alarm
situation which results in the following message
being displayed:
"top up tank"
(accompanied by all the LEDs on
the control panel flashing).
Following this
response the device automatically resets.
Important
When the device is in the manual filling mode,
the small pipes positioned inside the tank must
fitted correctly into the cylindrical transparent
containers so that the flow of water in front of
the solenoid distribution valve is always kept
constant
.
Fig. 5
Fig. 6
Fig. 7