Use and installation manual
Issue date:
28
th
Oct 2009
Revision:
IMQ
Page :
22/84
7.
CONNECTION TO THE
ELECTRICITY MAINS
FOR MAINTENANCE WORKER ONLY
Before fitting the plug in the power supply
socket, for your own safety, al already
mentioned in the previous paragraph, please
read the following precautions.
- The device’s electrical safety is only
guaranteed when it is connected to a suitable
earth system, structured as provided for by the
national safety regulations in force (fig.2).
Therefore, the manufacturer cannot be held
responsible for any damage caused by failure to
earth the system correctly.
- For a safe and correct installation, it is
essential to provide a suitable socket controlled
by a thermal cut-out switch whose contacts are
at least 3 mm apart, in compliance with the
national safety regulations in force (see fig. 2).
- Never use extensions or multiple adaptors.
- Check the power lead along its entire length to
make sure it is not crushed in any way.
- To unplug the device, first disconnect the
power supply with the switch, then grip the plug
and gently pull it out.
Important
IF THE POWER CABLE IS DAMAGED, IT MUST
BE REPLACED BY THE MANUFACTURER, ITS
AFTER SALE SERVICE OR BY QUALIFIED
PERSONNEL, TO PREVENT ANY POSSIBLE
RISKS.
Fig. 2