Spirit AirBike AB900, Owner'S Manual

Page: 34 / 42

34
M
aintenance
A regular preventative maintenance schedule with all fitness equipment ensures that products are working at an optimal condition without
affecting the end user exercise experience. To assist in the maintenance regiment, it is recommended to break service into: Daily, Weekly,
& Monthly activities. Details on each activity can be found in the “Maintenance” section of this document.
Tools
Working on this product will require basic and/or sometimes specialty tools based on the type of service that will be performed at any time.
To assist, Spirit Fitness recommends having the tools listed (Fig. 1) available when performing maintenance.
Tool Purpose
Crank Puller Removing cranks & pedals
Metric Allen (Hex Key) Wrench Set
Tightening or removing various Allen head screws
throughout the product.
Metric Sockets Set
Tightening or removing various hex nuts used
throughout the product.
Metric Open Wrench Set
Tightening or removing various hex nuts used
throughout the product.
Square Drive Ratchet Wrenches
To use in conjunction with Allen head and or hex
socket sets.
Torque Wrench
Tightening various critical bolts throughout the
product to specific torque specifications.
Phillips Head Screwdriver Set
Tightening or removing various Phillips head
screws used throughout the product.
Flat Head Screwdriver Set Prying off specific shrouds from wedged locations.
Fig. 1
Moving & Leveling
To move the bike to a new location:
Lift the bike from the rear and use the front wheels (located on the front leg, below the handlebar) to roll the bike from one location to
another.
To level the bike:
Use the four leveling adjusters (located on the underside of the front and rear legs) to compensate for uneven floor surfaces.
Preventive Maintenance
Perform regular scheduled preventive maintenance procedures to maintain your Air Bike bike in serviceable condition.
Daily Maintenance
The life of your product will be determined by how consistently you perform the daily maintenance procedures. Dry the Air Bike after each
use to remove sweat and moisture. It is best to use a liquid non-abrasive cleaner diluted with water.