23
WARNING
To prevent any damage, verify the cable harness is
not kinked and out of the way of the brackets when
mating the console mast to the base of the
machine.
STEP 4.
Assembly of Console set, Seat, Pedals, and Connecting Arm Coves
1.
Connect the cable (23) to the console set (34) carefully.
2.
Use a screw driver (93) to fasten the console set (34) onto the console base (10) with four screws (58).
3.
Use a wrench (100) to fasten the left pedal (45L) onto the left crank arm (16L) and right pedal (45R) onto the right crank arm (16R)
respectively.
4.
Use a wrench (100) to fasten the seat (19) onto the sliding seat mount (7).
5.
Use a screw driver (93) to fasten the left connecting arm cover (144) onto the left handlebar (3) with one phillips head screw (90).
6.
Use a screw driver (93) to fasten the right connecting arm cover (143) onto the right handlebar (4) with one phillips head screw(90).
HARDWARE
#90.
M6 × 10mm
Phillips Head Screw (2pcs)
#58.
M5× 12mm
Phillips Head Screw
(4cs)
Summary of Contents for AirBike AB900
