Customer Service 1-888-707-1880
Dyaco Canada Inc. 2020
Email: [email protected]
11
2
HANDGRIP
HARDWARE
STEP 2
#75.
3/8"×3/4" Button Head
Socket Bolt
(6 pcs)
#76.
3/8" ×2” Button
Head Socket Bolt
(2 pcs)
#100.
3/8" ×19 ×1.5T
Flat Washer (4 pcs)
#106.
3/8"×23×2.0T Curved
Washer (8 pcs)
#77.
3/8" × 2-1/4"
Hex Head Bolt (4pcs)
#93.
3/8" ×7T Nyloc Nut
(4 pcs)
1.
Put Upper Left Handgrip (15) with orientation of 90 degrees bending at front onto
Connecting Plate B on Console Mast (2) and temporarily hold it with a 3/8"x3/4" Button
Head Socket Bolt (75) together with a 3/8"x23x2T Curved Washer (106) on the
Connecting plate B (not to tighten yet). Then insert one of Handgrip Connecting Tube
(10) to connect with Upper Left Handgrip at the 107-degree-bending end and
temporarily with two 3/8" x3/4" Button Head Socket Bolts (75) with L Allen Wrench-M6
(120). Then attach the bottom end of Handgrip Connecting Tube to the U-shape
mounting on left side of Rear Stabilizer with handle (11). Use two 3/8" x 2-1/4"Hex
Head Bolts (77) together with two 3/8" x 19 x 1.5T Flat Washers (100), two 3/8"x23x2T
Curved Washers (106) and two 3/8" × 7T_Nyloc Nuts (93) to tighten by using
13/14m/m Wrench (116) and 12/14m/m Wrench (117). Tighten and secure all other
bolts.
2.
Same way for Upper Right Handgrip (16) and the other Handgrip Connecting Tube (10)
with the same amount of hardware on the right side.
3.
Attach Handgrip Connecting Plate A (13) to Handgrip Connecting Plate B of Upper
Handgrip and Console Mast. Secure with two 3/8" × UNC16 × 2"_ Button Head Socket
Bolts (76) and two 3/8"x23x2T Curved Washers (106) by using 13/14m/m Wrench (11
