Page 51 of 54
Step 3:
Remove the heat shield from the gas control.
This is a special sleeve that is over the gas
control. It must be replaced.
Step 4:
Remove the battery cover from the gas control.
Remove the old batteries and using the diagram
on the inside of the cover fit new high quality
alkaline batteries. Ensure the batteries are
positioned correctly and the gas control is
switched on (switch in I postion)
Step 5:
Reverse the steps above ensuring all the heat
shields and vanity cover are secured again. The
fire will now operate as normal.
Note: If you are not intending to use the fire for a long period (i.e. over
summer time months), the battery life can be extended even more by sliding
the white isolator switch to the left (away from the On position, symbol 0).
Don’t forget to switch it back on in the winter!
Cleaning Instructions
Before cleaning the appliance turn off the gas fire and allow it to cool for a
number of hours. Before using any cleaning materials test a small area first to
ensure compatibility with the appliance finish. We cannot be held responsible
for damage caused by cleaning the appliance. Remove the ceramics and place
them in a safe place before starting to clean the gas fire.
Cleaning the Gas Fire Burner and Enclosure
The most effective method of dust/debris removal is achieved with the aid of a
vacuum cleaner however; great care must be taken to ensure that the pilot
assembly is not touched. Using a vacuum cleaner with a soft brush head gently
remove any debris/dust from inside the enclosure and around the burner unit.
Then use a soft cloth to clear any marks.
