7
STEP 2
1.
Gather
HARDWARE FOR STEP 2.
2.
Unwind the COMPUTER CABLE (27) from the frame bracket and run it through the
CONSOLE MAST COVER (38). Use the twist tie at the bottom of the CONSOLE MAST
TUBE (2) and wrap around the computer cable. Feed the computer cable up through the
MAST (2) and pull through the top of the mast.
3.
Insert the bottom of the CONSOLE MAST (2) into the frame bracket. Be sure not to pinch
the computer cable between the mast and the frame during this step.
4.
Slide the CONSOLE MAST COVER (38) up the CONSOLE MAST (2) and secure the
mast to the frame with 3 BOLTS (85) and 3 FLAT WASHERS (84) to each side of the mast.
Secure with a BOLT (85) and CURVED WASHER (86) to both the front and back of the
mast. Tighten all bolts with the 13/14 WRENCH.
5.
Snap the CONSOLE MAST COVER (38) in place over the frame covers.
HARDWARE
#86.
5/16" × 23 × 1.5T
Curved Washer
(2 pcs)
#84.
5/16" × 18 × 1.5T
Flat Washer
(6 pcs)
#85.
M8x15mm
Hex Head Bolt
(8 pcs)
Summary of Contents for 161173795US
Page 32: ...32 Exploded View Diagram...
