manualshive.com logo in svg

Spirax Sarco ELM, Installation, Operating And Maintenance Instructions, Page: 42 / 80

Share
Download
Spirax Sarco ELM Installation, Operating And Maintenance Instructions Download Page 42

IM-P309-02 

 MI Issue 2

42

15.1.1   Volume flow rate

If you select the function "volume flow," the following will be displayed (example):

Volume flow 

100.0 l/h

The LCD shows the current volume flow rate. You define the display unit in the functional 

class FLOW using the function "volume flow unit".

15.1.2   Forward flow counter 1

Forward flow counter 1 and forward flow counter 2 are independent counters that can also be 

reset separately. With counter 1, for example, you can measure the yearly or monthly volume. 

If you select the function "forward flow counter 1", the following will be displayed (example):

Counter 1 forw. 

+ 000001.0 l

The LCD shows the current value of forward flow counter 1. You define the display unit in the 

functional class COUNTERS using the function "unit of counter".

15.1.3   Forward flow counter 2

The function is identical with the function of forward flow counter 1. For example, forward flow 

counter 2 can be used as a daily counter. If you select the function "forward flow counter 2", 

the following will be displayed (example):

Counter 2 forw. 

+ 000001.0 l

The LCD shows the current value of forward flow counter 2. You define the display unit in the 

functional class COUNTERS using the function "unit of counter".

15.1.4   Reverse flow counter

If you select the function "reverse flow counter," the following will be displayed (example):

Counter reverse

000000.0 l

The LCD shows the current value of the reverse flow counter. You define the display unit in 

the functional class COUNTERS using the function "unit of counter".

15.1.5   Flow velocity

If you select the function "flow velocity," the following will be displayed (example):

flow velocity

 1.5 m/s

The LCD shows the current value of the mean flow velocity of the medium. The display unit is 

always meters per second (m/s). The mean velocity is calculated from the measured volume 

flow and the flow area of the meter tube. In order to calculate the flow area of the meter tube, 

enter the inside diameter of the meter tube. To do so, use the "inside diameter" function in 

the functional class SETTINGS ELM.

Summary of Contents for ELM

















































































Reviews:

No comments