IM-P309-02
MI Issue 2
4
Installation, commissioning, operating personnel
Mechanical and electrical installation, as well as commissioning,
maintenance and operation, are to be realized solely by qualified
personnel that are authorized by the installation operator to perform
such work. All such personnel must read and understand the content
of the applicable operating instructions before working with the device.
In general, follow the conditions and provisions applicable in your country.
The present document contains the information that you need in order to operate the
product described herein properly. The document is intended for use by qualified
personnel. This means personnel who are qualified to operate the device described
herein safely, including electronics engineers, electrical engineers, or service
technicians who are conversant with the safety regulations pertaining to the use
of electrical and automated technical devices and with the applicable laws and
regulations in their own country.
Such personnel must be authorized by the facility operator to install, commission and
service the product described herein, and are to read and understand the contents of
the present operating instructions before working with the device.
2.1 Hazard warnings
The purpose of the hazard warnings listed below is to ensure that device operators
and maintenance personnel are not injured and that the flowmeter and any devices
connected to it are not damaged.
The safety advisories and hazard warnings in the present document that aim to avoid
placing operators and maintenance personnel at risk and to avoid material damage
are prioritized using the terms listed below, which are defined as follows in regard to
these instructions herein and the advisories pertaining to the device itself.
2.2 Danger
means that failure to take the prescribed precautions will result in death, severe bodily
injury, or substantial material damage.
2.3 Warning
means that failure to take the prescribed precautions could result in death, severe
bodily injury, or substantial material damage.
2.4 Caution
means that the accompanying text contains important information about the product,
handling the product or about a section of the documentation that is of particular
importance.
Note
means that the accompanying text contains important information about the
product, handling the product or about a section of the documentation that is of
particular importance.
Summary of Contents for ELM
Page 2: ...IM P309 02 MI Issue 2 2 ...
Page 78: ...IM P309 02 MI Issue 2 78 ...
Page 79: ...IM P309 02 MI Issue 2 79 ...
Page 80: ...IM P309 02 MI Issue 2 80 ...