SpinCore Technologies PB12-100-4k, Owner'S Manual

Page: 20 / 39

PulseBlaster
SP17 and PCIe Boards Specific Pin Assignments
Shrouded IDC Connector Flag0..11 - Pin Assignments
The shrouded IDC connector labeled Flag 0..11 outputs TTL signals generated by the user’s
program. Please consult the table below for pin assignments.
Pin Assignments
Pin# Pin#
1 Bit 0 13 Bit 6
2 GND 14 GND
3 Bit 1 15 Bit 7
4 GND 16 GND
5 Bit 2 17 Bit 8
6 GND 18 GND
7 Bit 3 19 Bit 9
8 GND 20 GND
9 Bit 4 21 Bit 10
10 GND 22 GND
11 Bit 5 23 Bit 11
12 GND 24 GND
Table 2: Lower 12 output bits and 12 ground lines on the 24 pin IDC connector.
The shrouded IDC connector labeled Flag 0..11 can be connected to IDC-MMCX adapter boards
(Figure 17, page 36) which allow the use of MMCX cables. This enables the individual bits of the
PulseBlaster to be more easily accessed. Pin 1 on the MMCX adapter board can identified with a
square pin.
Shrouded IDC Connector Flag12..23 - Pin Assignments
The shrouded IDC connector labeled Flag 12..23 outputs TTL signals generated by the user’s
program. Please consult the table below for pin assignments.
The shrouded IDC connector labeled Flag 12..23 can be connected to IDC-MMCX adapter
boards (Figure 17, page 36) which allows the use of MMCX cables. This enables the individual bits of
the PulseBlaster to be more easily accessed. Pin 1 on the MMCX adapter board can identified with a
square pin.
http://www.spincore.com 2021/03/22 20