41
Problems - Causes - Remedies
Problems
Causes
Remedies
The coffee is not creamy on the
surface
Coffee leaks outside the brew
group
The machine takes too long to
heat up or the quantity of water
dispensed from the wand is
limited
The brew group cannot be
taken out
The blend is not suitable or the
coffee is not freshly roasted or
is ground either too finely or
too coarsely.
Brew group is clogged
The machine circuit is clogged
by scale
Brew group out of place
Dump box still in place
Change the coffee blend or
adjust the grinder as directed
in par.5.1
Increase the dose par. 5.2
Clean the brew group and its
outlets
Descale the machine
Turn on the machine. Close the
service door. The brew group
will automatically go back into
place.
Remove the dump box before
taking out the brew group
If you have a problem that is not dealt with in the above table or is not resolved
by any of these solutions please contact an authorized service center.
Summary of Contents for 741452007
