Spidem 741452007, Operating Instructions Manual

Page: 29 / 132

29
Installation
4 INSTALLATION
For your own safety and the safety of
others, you must strictly comply with
the “Safety Rules” described in chap.3
4.1 Package
The original packaging was designed and
made to protect the machine during
shipping. We recommend keeping it for
future transport purposes.
4.2 Preliminary oprations
• Remove the packet containing the lid, the
key for the brew group and the cleaning
brush from the packing materials.
• Take the coffee machine out of its
packaging and position it in a suitable
place conforming to the requisites
described in the safety rules (chap.3.)
• Fit the coffee container lid (10) onto the
coffee container (9); store the brew
group key and cleaning brush in a safe
place.
• Make sure that the tray (2) with grill, the
dump box (1) and the brew group (14)
are correctly fitted and that the front door
(13) is closed.
• Before plugging the machine into the
mains, make sure the button (16) is on
OFF.
4.3 Turning on for the first time
• Lift out the water container (7) and
remove the lid (8). Rinse it out and fill it
with fresh drinking water, making sure
you do not overfill it. Lower the container
back into place inside the machine and
replace the lid.
Fill the container (7) only with
cool, fresh water. Hot water or
other liquids may damage the
container and/or the machine.
Always make sure there is enough
28
water inside the container before
starting the machine.
• Take off the lid (10) and fill the
container with whole coffee beans (9).
• Fit the lid of the coffee container back
into place.
Fill the container (9) with
whole coffee beans only.
Ground or freeze-dried coffee or any
other objects will damage the
machine.
• Insert the plug (15) into a suitable outlet.
• The button (16) is positioned on OFF.
Simply press the button (16) to turn on
the machine.
• Press the button (6); the machine will start
heating up. The message
r i n s i n g
w a r m i n g u p
will appear on the
display. It will take the machine about 2
minutes to heat up. As soon as it reaches
the right temperature it will perform a
cleaning cycle. At the end of the cycle
the message
s e l e c t p r o d u c t
r e a d y f o r u s e
will
appear on the display.
4.4 Priming
• Position the steam wand (5) over
the drip tray.
• Turn the knob (6) counterclockwise
and wait until water flows smoothly
from the steam wand; to cut off flow,
turn the knob (6) clockwise.
Note: Prime the machine before
starting up for the first time, or
if the machine has been inoperative
for a lengthy period or the water
container has been completely
emptied, it is advisable to load the
circuit. The machine should also be
primed whenever the message
27
30
i