- 22 -
Always “self test” the tester (S.E.T) before you start. Do this by touching both ends
simultaneously. The red light should illuminate indicating that the S.E.T. is functioning correctly.
Electrostatic test.
Turn on the electrostatic generating head.
Hold the S.E.T. with the screwdriver tip between the fingers. With the handle end pointing towards
the generating head, about 1mtr. Away, move towards the electrode at the end of the electrostatic
generator and you should see a strong red light illuminate, being at it strongest when you are
within 400-500mm from the electrode.
Always make sure you are holding onto an earthing point when doing this test, or you are
wearing conductive shoes.
If no red light appears refer to the main manual under Fault Finding:
